Sink Type Optically Isolated Digital Output Module

Features

• 11 channels of optically isolated transistor output for industrial and equipment control applications: Sink type (Open Collector), DC Voltage 0..24V digital, 200 mA max. load

• Individually configurable direct/reverse on delay timing with fault safety

• Low power consumption

• Compact design, DIN rail mounting

• Configurable standard firmware supplied pre-loaded, support for custom program development available

Overview

Discrete Output Module (62022) is designed based on high performance LonWorks Control Module (52004), could be monitored and controlled with communications over a LonWorks network.

The 11 optical electric isolated transistor outputs could be actuated individually and suitable to switch electrical components such as alarm switch, valve, and other actuators, etc.

A 32kb programmable flash memory provides storage for application programs and data.

Specification

Configuration

• Network Variables

  　

  Direction	Variable Name	Function	Type	Range	Default
  Input*	nvidisc[11]	Output Set Value	SNVT_lev_disc or SNVT_switch	-	-
  	nciProcess[11]	Work Mode*	SNVT_lev_disc	-	ST_OFF
  	nciFault[11]	Safe Fault Value	SNVT_lev_disc or SNVT_switch	-	ST_OFF
  	nciDelay[11]	Delay interval	SNVT_count	0-65536	10, - Delay 10ms
  Output	nvodisc[11]	I/O Actual Status	SNVT_lev_disc or SNVT_switch	-	-

  *Nonvolatile, customizable to specified requirements and applications

  　

  Table1  Work Mode

  nciProcess	Mode	Function
  ST_OFF	Direct	nvodisc[i]=nvidisc[i],
  ST_LOW	Delay	delay_timer[i]=nciDelay[i] nvodisc[i]=nvidisc[i]
  ST_MED	Reverse	nvodisc[i]=STRS-nvidisc[i]
  ST_HIGH	Reverse & Delay	delay_timer[i]=nciDelay[i] nvodisc[i]=STRS-nvidisc[i]
  ST_ON	Fault Safety	nvodisc[i]=nciFault[i]

  　

  　

• LED Indicators

  　

  tr>

  Name	Color	Function
  DS1	Yellow	DO1 status indicator, turn ON when contact closes
  DS2		DO2 status indicator, turn ON when contact closes
  DS3		DO3 status indicator, turn ON when contact closes
  DS4		DO4 status indicator, turn ON when contact closes
  DS5		DO5 status indicator, turn ON when contact closes
  DS6		DO6 status indicator, turn ON when contact closes
  DS7		DO7 status indicator, turn ON when contact closes
  DS8		DO8 status indicator, turn ON when contact closes
  DS9		DO9 status indicator, turn ON when contact closes
  DS10		DO10 status indicator, turn ON when contact closes
  DS11		DO11 status indicator, turn ON when contact closes
  SRV	Green	~Service
  		Alive indicator, blinks every 2 and 5 seconds
  PWR	Red	Power supply indicator

  　

• Connectors

Installation

• APB

• NXE

• XIF

Price

* Minimum Order Amount May Applied

Other Related Products

• LON: Discrete Input Module

• LON: Relay Output Module

• Modbus: Discrete Input & Output RTU