Model: 61021

• 11 channels of optically isolated digital input for industrial and equipment control applications: Volt-free contacts NO/NC, DC Voltage 0..24V digital

• Individually configurable direct/reverse on delay timing

• Real-time data acquisition, sample period could be set from 0.1s to 2s each channel

• Protection against power supply transients and reverse wiring avoids common hardware failures

• Low power consumption

• Compact design, DIN rail mounting

• Configurable standard firmware supplied pre-loaded, support for custom program development available

> More Info

User Manual

Model: 62022

• 11 channels of optically isolated transistor output for industrial and equipment control applications: Sink type (Open Collector), DC Voltage 0..24V digital, 200 mA max. load

• Individually configurable direct/reverse on delay timing with fault safety

• Low power consumption

• Compact design, DIN rail mounting

• Configurable standard firmware supplied pre-loaded, support for custom program development available

> More Info

User Manual

Model: 66031

• 6 channels of optically isolated relay output for industrial and equipment control applications: 30VDC/250VAC/8A

• Individually configurable direct/reverse on delay timing with fault safety

• Low power consumption

• Compact design, DIN rail mounting

• Configurable standard firmware supplied pre-loaded, support for custom program development available

> More Info

User Manual

Model: 63021

• 8 channels single-end analog current / voltage Input for industrial and equipment control applications: 0..20mA, 0..5VDC

• 12 bits A/D, Precision: Better than 0.25%

• Individually configurable

• Real-time data acquisition, sample period could be set from 0.1s to 2s each channel

• Protection against power supply transients and reverse wiring avoids common hardware failures

• Low power consumption

• Compact design, DIN rail mounting

• Configurable standard firmware supplied pre-loaded, support for custom program development available

> More Info

User Manual

Model: 64001

• 4 Channels Isolated Analog Voltage Output: 0..5VDC

• 12 bits D/A, Precision: better than 0.5%

• Local Events Handle, individually configurable

• PID Function Block inside

• Protection against power supply transients and reverse wiring avoids common hardware failures

• Low power consumption

• Compact design, DIN rail mounting

• Configurable standard firmware supplied pre-loaded, support for custom program development available

> More Info

User Manual

Model: 10981

• Coupling different transfer media types: FTT-10, TP/XF-78, TP/XF-1250

• Logical segmentation of LonWorks networks, Saving bandwidth

• Actives noise suppression, extending channels in their physical shape or in their number of nodes

• Improving reliability of networks by creating additional signal paths

• Logical filtering of messages

• Easily configurable with any standard tool supporting routers

• Low power consumption

• Compact Design, DIN Rail mounting

> More Info

User Manual

Model: 32022

• Connects EIA232 or EIA485 devices to LonWorks Network

• UART 16550 includes FIFO

• Support 8 kinds of communication rate, 1200 to 115200 bps

• DIN-rail mounting

> More Info

User Manual

Model: 89041

• 32 bits PCI LonWorks Adapter

• Plug & Play

• Integral FTT-10A, TPT/XF-78 or TPT/XF-1250 transceiver

• LNS Network Service Interface

> More Info

User Manual

Model: 85021

• Serial EIA232 interface connects host processor and modem to LonWorks Network

• UART 16550 includes FIFO

• Support 8 kinds of communication rate, 1200 to 115200 bps

• Integral FTT-10A, TPT/XF-78 or TPT/XF-1250 transceiver

• DIN-rail mounting

> More Info

User Manual

Model: 88022

• Connect LonWorks networks to TCP/IP Ethernet networks for commercial, industrial, residential and utility applications

• LAN<=>LON 100% transparent data-flow transfer

• Ethernet:

  • 10MBaseT Ethernet interface

  • Static or acquired IP address

  • Capable of process at least 160 packets per seconds

• LonWorks

  • Twisted pair (TP/FT-10, TP/XF-1250 and TP/XF-78) LonWorks channel support

  • Virtual SLTA-10 or SLTA LonWorks network interface, using Echelon 65202 LTS-20 core module

  • LNS (NSI) or LonManager API (MIP) support

• Up to 15 (Windows 95/98) or 255(Windows2000/NT/XP) adapters could be connect to one PC

• Network drivers for Windows 95/98/2000, Windows NT/XP and Linux available

• Local or remote configuration, monitor and control support

• Optional password protection

• DIN-rail mounting

> More Info

User Manual

Model: 11981

• FTT-10/10A physical layer repeater

• Extends/doubles wiring distance of LonWorks Networks

• Low cost alternative to routers configured as repeaters

• Isolates network traffic

• Improves performance and reliability of network

• 5MHz clock input

• Low power consumption

• Compact Design, DIN Rail mounting

> More Info

User Manual

Model: 91981

• Reduce packet error and increase network throughput

• Compliance with LonWorks interoperation specifications

• Adapted for diverse channels and topologies

• Removable terminal block for flexible field wiring connections

• Power presence indication

• Simple installation, Compact and Low cost

> More Info

User Manual

Model: 52164

• On-board FT 6050 Smart Transceiver Chip

• Differential Manchester encoded signaling for polarity insensitive network wiring.

• Transformer-isolation

• Supported Data Rate - 78 kilobits per second

• Distances up to 500 meters max for free topology, and up to 2700 meters max for doubly terminated bus topology

• Includes 64 KB I2C Serial EEPROM memory, and support in-circuit programming

• Low power consumption.

• Compact Vertical Mount Configuration

• Common form factor makes control modules interchangeable, also a fast replacement of FT5000 Control Point Module

> More Info

User Manual

Model: 52124

• On-board FT 5000 Smart Transceiver Chip

• Differential Manchester encoded signaling for polarity insensitive network wiring.

• Transformer-isolation

• Supported Data Rate - 78 kilobits per second

• Distances up to 500 meters max for free topology, and up to 2700 meters max for doubly terminated bus topology

• Includes 64 KB I2C Serial EEPROM memory, and support in-circuit programming

• Low power consumption.

• Compact Vertical Mount Configuration

• Common form factor makes control modules interchangeable

> More Info

User Manual

Model: 52004

• On-board Neuron FT3150 Smart Transceiver, 32Kbyte Flash and 32Kbyte SRAM

• Differential Manchester encoded signaling for polarity-insensitive network wiring

• Transformer-isolation

• 78 kilobits per second

• Distances up to 500 meters worst case in free topology

• Local event processing

• Common form factor makes control modules interchangeable

• Low power consumption

• Compact Design

> More Info

User Manual

Model: 52114

• On-board Neuron FT3150 Smart Transceiver (or TMPN3150 and FTT-10A), 32Kbyte Flash

• Differential Manchester encoded signaling for polarity-insensitive network wiring

• Transformer-isolation

• 78 kilobits per second

• Distances up to 500 meters worst case in free topology

• Local event processing

• Common form factor makes control modules interchangeable

• Low power consumption

• Compact Design

> More Info

User Manual

Model: 53011

• 32Kbyte flash memory provides non-volatile application memory that can be reprogrammed in the field

• 32Kbyte RAM provides protocol buffer space for applications that receive large bursts of network traffic

• 2 memory maps allow the developer to maximize flash or RAM space

• Built-in Microprocessor Interface Program (MIP)

• 10MHz input clock

• Modular connectors allow modules to be exchanged without soldering

• Supports most standard LonWorks transceivers

• Compact Design, exchangeable with Echelon's LTM-10A Module

> More Info

User Manual